3M VHB-9473PC (0.75-Inch-Roll)

Additional Product Information

Overview

These high-performance adhesive transfer tapes utilize 100MP acrylic adhesive technology to provide permanent structural bonding without the need for mechanical fasteners. Widely used in aviation manufacturing and MRO environments, they replace rivets, spot welds, and screws while maintaining clean aesthetics and uniform stress distribution. Maintenance teams rely on these tapes for their long-term holding power, environmental resistance, and ability to perform under demanding aircraft operating conditions.

Key Technical Specs for VHBTM Adhesive Transfer Tapes with High Performance Acrylic Adhesive 100MP

• Type: High-performance acrylic adhesive transfer tape (thermoplastic)
• Adhesive Thickness Options: 0.002 in (0.050 mm), 0.005 in (0.125 mm), 0.010 in (0.250 mm)
• Liner Thickness: 0.004 in (0.100 mm)
• Liner Material: Polycoated paper (printed or unprinted) or polypropylene (model dependent)
• Color: Transparent
• Viscosity/Consistency: Solid acrylic adhesive; pressure-activated
• Working/Application Temperature: Ideal 70°F to 100°F (21°C to 38°C); not recommended below 50°F (10°C) during application
• Tensile/Peel Strength: Up to 19.5 N/cm adhesion to stainless steel (72 hr dwell); up to 12.4 N/cm adhesion to PET
• Static Shear: >10,000 minutes at 302°F (150°C), 1000 g/25 mm
• Service Temperature Range: -40°F to 194°F (-40°C to 90°C) continuous; short-term exposure up to 500°F (260°C)
• Environmental Resistance: Resistant to engine oil, saltwater (5%), high humidity (100% RH), gasoline, mild acids and alkalis
• Typical Uses: Fastener replacement, metal-to-metal bonding, composite panel attachment, trim installation

Approvals & Specifications

• UL Recognized – File MH17478
• Compliant with TSCA (classified as article)
• Exempt from OSHA MSDS requirements under 29 C.F.R. 1910.1200(b)(6)(v)
• Suitable for aviation interior and exterior bonding applications (non-structural primary structure)

Typical Aircraft MRO / AOG Applications

• Bonding aircraft interior panels and trim components
• Nameplate and placard attachment
• Composite-to-metal bonding in cabin assemblies
• Wire channel and bracket mounting
• Galley and lavatory component attachment
• Temporary structural reinforcement during AOG events

Compatibility & Safety Notes

• Compatible with stainless steel, aluminum, PET, composites, and high surface energy plastics
• Surfaces must be clean, dry, and free of oils; recommended cleaning with isopropyl alcohol/water mix or approved aviation solvents
• Apply firm pressure to ensure optimal adhesive-to-surface contact
• Avoid application below 50°F (10°C)
• Use appropriate PPE when preparing surfaces with solvents

Packaging & Procurement

• Available in multiple thickness variants for gap control and load requirements
• Supplied in roll format with protective liner
• Printed (“F” prefix) and non-printed liner versions available
• Easy die-cutting for custom aviation kits
• Store in original packaging under controlled temperature and humidity conditions

Why VHBTM Adhesive Transfer Tapes with High Performance Acrylic Adhesive 100MP is Chosen for AOG / MRO

• Eliminates need for drilling or mechanical fastening
• Reduces aircraft weight compared to rivets and screws
• Fast application minimizes aircraft downtime
• Strong environmental and chemical resistance
• Clean finish ideal for visible cabin areas

Practical Suggestions for Your Team (AOG Mindset)

• Stock multiple thickness options (0.002 in / 0.005 in / 0.010 in) for rapid field adaptability
• Pre-cut strips for common interior repair sizes
• Train technicians on proper surface prep and pressure application
• Store controlled inventory in humidity-regulated cabinet
• Include in rapid-response AOG bonding kits

Manufacture / Aviation Spec Codes

• Manufacturer: 3M
• Product Series: 100MP Adhesive Transfer Tapes
• Models: F9460PC, 9460PC, F9469PC, 9469PC, 9469FL, F9473PC, 9473PC
• UL File: MH17478
• Export Classification: Commercial adhesive article

Alternative Names & Descriptions

• 100MP Acrylic Adhesive Transfer Tape
• VHB Adhesive Film Tape
• High-Performance Acrylic Bonding Film
• Industrial Fastener Replacement Tape
• Transparent Structural Bonding Transfer Tape