3M 4016 (2-Inch-Roll)

Additional Product Information

3M 4016 is trusted by MRO teams and aircraft engineers worldwide, from those maintaining the most advanced military aircraft to those servicing commercial airliners responsible for millions of passengers every year. Because it delivers unmatched reliability and performance. Its double-coated urethane foam construction provides strong, long-lasting adhesion, vibration damping and precise mounting for interior panels, nameplates and components. Resistant to temperature extremes and designed to perform under demanding conditions, 3M 4016 helps engineers work faster, safer and with confidence. When quality and safety matter most, this is the mounting tape trusted across the aviation industry.

Key Technical Specs for 3M 4016

• Material: Open-cell urethane foam with double-sided acrylic adhesive
• Thickness: 1.6 mm (0.0625 in.) | Width: 2 in. (50.8 mm) | Length: 36 yd (32.9 m)
• Temperature Resistance: Long-term 104°C (220°F), short-term 193°C (380°F)
• Tensile / Elongation: 965 kPa, 100% elongation
• Cold Flex: No cracking at −30°C (−20°F)
• Solvent & UV Resistance: Stable against hydrocarbon solvents and 7 days of UV exposure
• Liner: Green plaid paper, 0.08 mm (3 mil)
• Storage: 16–27°C (60–80°F), 40–60% RH, use within 24 months

Approvals & Specifications for 3M 4016

• 3M 4016 is qualified under 3M industrial and aerospace tape standards
• It may appear on OEM-approved consumables lists under “mounting tape - foam, double-sided.”
• Commercial equivalent approvals: meets performance of 3M Adhesive 100 systems used in multiple OEM specs for interior adhesive tapes.
• Flammability: Not classified as a flammable solid under standard storage conditions.

Typical Aircraft MRO / AOG Applications for 3M 4016

• Cabin interior maintenance: mounting placards, trim, signs, seat labels or minor components.
• Electrical bay & galley areas: temporary or semi-permanent component positioning.
• Vibration control: between light panels or covers.
• AOG practicality: allows rapid installation or replacement of interior components without curing or tooling delays, reducing aircraft downtime and cost.
• Stock advantage: Keeping 3M 4016 on hand ensures that line maintenance engineers and ground crew can respond quickly to in-service adhesive needs. Especially for interior trim and non-structural repair tasks.

Compatibility & Safety Notes for 3M 4016

• Bonds well to metals, plastics and painted surfaces.
• Surface prep: clean with isopropyl alcohol or heptane. Ensure dry, contaminant-free surfaces.
• Application temp: ideal 21–38 °C (70–100 °F). Avoid application below 10 °C (50 °F).
• Storage: 16–27 °C (60–80 °F), 40–60 % RH; use within 24 months of manufacture.
• Safety: Non-corrosive and low VOC. Always follow standard PPE when applying adhesives in confined aircraft spaces.

Packaging & Procurement for 3M 4016 (matched to the Aerospheres page and common market packs)

• Product Name: 3M 4016 (2-Inch-Roll)
• Part Number: 3M 4016
• Dimensions: 2 in × 36 yd (50.8 mm × 32.9 m)
• Packaging: Single roll, supplied with green plaid release liner.
• Condition: New, factory-sealed, traceable batch packaging suitable for aviation quality control.
• Category: Adhesive Tapes → Foam Mounting → Double-Sided Urethane Tape

Why 3M 4016 is Chosen for AOG / MRO

• Quick, tool-free bonding solution during AOG events.
• Reduces downtime. No cure time, no mixing, no cleanup.
• Reliable under vibration, pressure and heat.
• Approved by many operators as a standard consumable for aircraft interiors.
• Foam structure allows slight irregularity compensation. Perfect for on-wing or hangar fixes.

Practical Suggestions for Your Team (AOG mindset) for 3M 4016

• Keep multiple roll widths (e.g., 0.5 in, 1 in, 2 in) in AOG kits for versatility.
• Always prep surface properly before applying for maximum adhesion.
• Use for temporary mountings when waiting on structural adhesive or part replacements.
• Label rolls with expiry and storage conditions per MRO QA procedure.

Manufacture / Aviation Spec Codes for 3M 4016

• Manufacturer: 3M Industrial Adhesives & Tapes Division
• Manufacturer Part Number: 4016
• ECCN / Export Code: EAR99
• Airbus / Boeing / Lockheed / OEM Specs:

• No direct proprietary spec publicly published.
• May cross-reference to internal engineering material categories such as:
• Boeing BAC5034 (Foam Adhesive Tapes – general equivalence class)
• Airbus ABD0031 Interior Material Category (interior adhesive applications)

Alternative Names & Descriptions for 3M 4016

• 3M 4016 Foam Tape
• 3M 4016 Double-Coated Foam Mounting Tape
• 3M Double-Sided Urethane Foam Tape 4016
• 3M 4016 Mounting Tape – 2" Roll
• 3M 4016 Adhesive Foam Tape
• Urethane Foam Mounting Tape (4016 Series)
• 3M Acrylic Foam Tape 4016