Momentive FRV-1106 (227-Gram)

FRV1106FC Fluorosilicone Adhesive Sealant

Overview

FRV1106FC is a one-component, ready-to-use fluorosilicone adhesive sealant designed for demanding aerospace, industrial and chemical sealing applications. This moisture-curing sealant forms a tough, resilient fluorosilicone rubber at room temperature, providing exceptional resistance to fuels, oils, solvents and aggressive chemicals. Its non-sag paste consistency, primerless adhesion to many substrates and wide operating temperature range make it ideal for sealing and bonding in environments where conventional silicone sealants are unsuitable.

Key Technical Specs

• Product Type: One-component fluorosilicone adhesive sealant
• Cure System: Moisture cure (room temperature)
• Colour: Red
• Consistency: Non-sag paste
• Specific Gravity: 1.45
• Tack-Free Time: Approximately 30 minutes
• Hardness: Shore A 30
• Tensile Strength: 500 psi
• Elongation: 300%
• Peel Strength: 15 lb/in
• Continuous Service Temperature: -60°C to 204°C
• Short-Term Temperature Resistance: Up to 260°C
• Maximum Recommended Application Thickness: 6 mm (1/4 in.)

Approvals & Specifications

• Designed for industrial and aerospace sealing applications requiring fluorosilicone performance
• Provides excellent resistance to hydrocarbon fuels, oils, solvents and many chemicals
• Primerless adhesion to many common substrates

Typical Applications

• Fuel system sealing
• Chemical processing equipment
• Pipe junction and flange sealing
• Form-in-place gasket (FIPG) applications
• Liquid storage tank seam sealing
• Bonding sensors within fuel tanks
• Vertical and overhead sealing applications

Compatibility & Safety Notes

• Clean all bonding surfaces thoroughly to remove oil, grease and contaminants before application
• Primer is generally not required on many substrates
• Allow full cure before applying service loads or pressure
• Higher temperature and humidity accelerate curing
• Acetic acid vapours are released during curing; ensure adequate ventilation
• Not recommended for delicate electrical or electronic assemblies containing copper, brass or other corrosion-sensitive metals
• Consult the latest Safety Data Sheet (SDS) before use

Packaging & Procurement

• Supplied ready to use in 5.4 fl. oz. SEMCO® cartridges
• Compatible with standard hand-operated and pneumatic SEMCO dispensing guns
• No mixing required

Why This Product is Chosen for AOG / MRO

• Outstanding resistance to aviation fuels, hydraulic fluids, solvents and chemicals
• One-component formulation eliminates mixing errors and speeds maintenance
• Fast tack-free time helps reduce aircraft downtime
• Excellent flexibility across a wide operating temperature range
• Non-sag consistency allows application on vertical and overhead surfaces
• Primerless adhesion reduces preparation time for maintenance personnel

Practical Suggestions for Your Team (AOG Mindset)

• Use for sealing components exposed to aviation fuel or aggressive chemicals where standard silicone sealants may fail
• Prepare substrates carefully for maximum long-term adhesion
• Apply before skin formation begins, as tooling after the tack-free stage is not recommended
• Allow maximum cure time whenever possible before placing equipment back into service
• Keep SEMCO cartridges available in maintenance kits for rapid field repairs

Manufacturer / Aviation Spec Codes

• Product Name: FRV1106FC
• Manufacturer: Momentive Performance Materials
• Product Type: One-component fluorosilicone adhesive sealant
• Technology: Moisture-curing fluorosilicone
• Application: Fuel-resistant sealing, chemical sealing and form-in-place gaskets