Jetflex JETFLEX-L-BAC7923 (3.3-Ltr-Tin)

Additional Product Information

Overview

JetFlex Aircraft Interior Finish 981300 Series is a two-component, solvent-based polyurethane enamel designed for finishing and refinishing plastic and metal interior components in aircraft cabins and cockpits. Manufactured by and engineered to meet BMS 10-83D Type II and Type III aerospace coating standards, this system delivers reliable durability, aesthetic refinement, and operational protection for aviation maintenance and manufacturing teams.

Key Technical Specs for JetFlex Aircraft Interior Finish 981300 Series

• Type: Two-component solvent-based polyurethane aerospace enamel
• Color: L-series low gloss (20–30 units) and E-series flat finish (8–12 units)
• Viscosity / Consistency: Sprayable viscosity of Gardner #2 Zahn Cup 20–24 seconds
• Cure / Working Time: Pot life up to 16 hours at 77°F / 25°C (25°C)
• Service Temperature: Must be applied and cured above 55°F / 13°C; curing temperature must not exceed substrate heat distortion limits
• Typical Uses: Aircraft cabin panels, cockpit interior trim, plastic composite surfaces, and metal interior fittings

Approvals & Specifications

• Meets aerospace interior coating performance requirements of regulatory guidelines related to flammability performance including FAR 25.853 system considerations
• Qualified for BMS 10-83D Type II and III interior finish standards
• Recommended for commercial and maintenance aviation interior refurbishment systems

Typical Aircraft MRO / AOG Applications

• Cabin wall panel refinishing
• Ceiling interior surface coating
• Cockpit interior component restoration
• Plastic furnishing and composite trim finishing
• Metallic interior hardware protection
• Texture or low-gloss decorative aerospace surface coating

Compatibility & Safety Notes

• Compatible substrates include properly cleaned plastic and treated metal surfaces
• Recommended surface preparation includes removal of grease, fingerprints, rust, and mold release agents
• Plastic substrates may require priming using JetFlex Primer CM0480930 or WR Spray Fil CM0481505
• Use chemical phosphate treatments on metals where applicable
• Personnel should use appropriate PPE including respiratory protection during spraying operations
• Ensure aircraft grounding to prevent static buildup during application

Packaging & Procurement

• Available in color component base materials and catalyst hardeners
• Mixing ratio: 7 parts color component to 1 part catalyst by volume
• Reducer addition: Approximately 2–4 parts of 25–50% JetFlex Reducer CM0110845 as required for spray viscosity adjustment
• Cool, dry storage required at 40°F–100°F (4°C–37°C)
• Filter strain mixed material before spray application

Why JetFlex Aircraft Interior Finish 981300 Series is Chosen for AOG / MRO

• Fast operational turnaround with touch dry times of 10–15 minutes at 75°F (25°C) and 50% RH
• Supports rapid maintenance and aircraft return-to-service workflows
• Consistent spray atomization for large cabin surface areas
• Flexible application across conventional, HVLP, and electrostatic spray systems
• Reliable coating integrity for high-frequency passenger cabin environments

Practical Suggestions for Your Team (AOG Mindset)

• Maintain recommended temperature and humidity conditions before and during coating application
• Target dry film thickness of 0.8–1.2 mils (20–30 microns) per coat
• Apply two medium wet coats with 10–15 minute flash-off between coats
• Ensure equipment lines are cleaned using JetFlex Reducer immediately after use
• Train technicians on correct catalyst ratio control to avoid extended curing cycles

Manufacture / Aviation Spec Codes

• Manufacturer:
• Product ID Series: 981300 (L and E color variants)
• Aerospace Specification Compliance: BMS 10-83D Type II and Type III
• Export / Technical Reference Codes: CM09813XX, CM0981520

Alternative Names & Descriptions

• JetFlex Aerospace Interior Polyurethane Enamel
• Aircraft Cabin Interior Finish Coating 981300 Series
• Solvent-Based Aerospace Interior Spray Enamel
• JetFlex Aviation Interior Refinishing System
• Aircraft MRO Interior Polyurethane Finish