Jetflex JETFLEX-E-09027-BAC7800 (3.3-LITRE-CAN)

Additional Product Information

Overview

JetFlex Aircraft Interior Finish is a high-performance, two-component solvent-based polyurethane enamel designed for finishing and refinishing plastic and metal components within aircraft cabins and cockpits. Trusted by MRO teams, it provides durable, smooth, and professional-quality interior surfaces while meeting stringent aerospace performance standards.

Key Technical Specs for JetFlex Aircraft Interior Finish

• Type: Two-component polyurethane enamel
• Size/Volume: Base component varies by packaging; Catalyst CM0981520
• Color: L-Colors (Low Gloss), E-Colors (Flat)
• Viscosity/Consistency: Sprayable, Gardner #2 Zahn Cup 20 24 seconds
• Cure / Working Time: Pot life 16 hours at 77 F / 25 C; Touch dry 10 15 minutes; Handle 30 60 minutes; Dry through 2 hours; Force dry 30 minutes at 140 F / 60 C
• Dry Film Thickness: 0.8 1.2 mils (20 30 microns)
• Theoretical Coverage: 432 sq. ft./gal per dry mil (10.6 m /L per 25 microns)
• Dry Film Weight: 0.0107 lbs./ft (52.4 g/m )
• Shelf Life: Base component 2 years; Catalyst 2 years; Aerosol touch-up kits 1 year
• Typical Uses: Cabin panels, cockpit controls, plastic trim, handles, metal interior fixtures
• Service Temperature: Apply and cure above 55 F / 13 C; force dry at 140 F / 60 C max for plastic substrates

Approvals & Specifications

• Boeing BMS 10-83D Type II and III
• Meets JAR/FAR 25.853 regulations on tested substrates

Typical Aircraft MRO / AOG Applications

• Finishing and refinishing cabin panels, overhead bins, and cockpit controls
• Plastic trim, handles, and molded components
• Metal interior surfaces such as brackets and fixtures
• Emergency AOG touch-ups and refurbishment projects

Compatibility & Safety Notes

• Compatible with properly prepared plastics and metals; prime plastic substrates with JetFlex Primer CM0480930 as needed
• Use personal protective equipment (PPE) during application, including respirator, gloves, and eye protection
• Ensure proper ventilation and grounding of aircraft to prevent static buildup
• Test coating on each substrate before production use

Packaging & Procurement

• Available in base component, catalyst, and aerosol touch-up kits
• Market packs designed for ease of mixing and application
• Store in cool, dry conditions between 40 F 100 F (4 C 37 C)
• Filter strain before spraying for optimal performance

Why JetFlex Aircraft Interior Finish is Chosen for AOG / MRO

• Fast drying and curing times for rapid turnaround
• Reliable adhesion across multiple interior substrates
• Versatile application methods including air spray, HVLP, and electrostatic systems
• Portable and easy to mix for on-site maintenance or refurbishment

Practical Suggestions for Your Team (AOG Mindset)

• Stock sufficient base, catalyst, and touch-up kits for emergency repairs
• Train staff on proper mixing ratios and pot life management
• Always prepare and clean surfaces thoroughly before application
• Maintain equipment clean-up routines with JetFlex Reducer CM0110845

Manufacture / Aviation Spec Codes

• Manufacturer: Sherwin-Williams Aerospace Coatings
• Product ID: JetFlex 981300 Series
• Catalyst: CM0981520
• Primer: CM0480930
• Optional Spray Filler: CM0481505

Alternative Names & Descriptions

• JetFlex 981300 L & E Colors
• JetFlex Polyurethane Enamel Interior Finish
• CM09813XX L & E Colors Base Component
• CM0981520 Catalyst Component
• JetFlex Interior Touch-Up Aerosol Kits