Bonderite BONDERITE-M-CR1201-AERO (1-qt-Can)

Additional Product Information

Overview

ALODINE 1201 is a chromic acid–based, nonflammable chromate conversion coating chemical designed for aluminum and aluminum alloy surface preparation. Widely used in aviation maintenance, repair, and overhaul (MRO) workflows, this coating forms an integral protective layer that enhances corrosion resistance and promotes superior paint adhesion. Maintenance and fabrication teams rely on this product for dependable pre-coating metal treatment in high-performance aerospace and industrial environments.

Key Technical Specs for ALODINE 1201

• Type: Chromate conversion coating chemical, chromic acid based aluminum surface treatment
• Color: Produces light gold to dark tan conversion coating finish
• Viscosity/Consistency: Liquid chemical solution
• Cure/Working Time: 2–5 minutes processing time during application
• Service Temperature: Processing temperature from ambient conditions up to 100°F (38°C); drying temperature should not exceed 140°F (60°C)
• Typical Uses: Aluminum corrosion protection and paint-ready surface conditioning

Approvals & Specifications

• Manufactured under quality standards of Henkel Corporation
• Designed for industrial aerospace surface treatment processes
• Supports general aviation, commercial aircraft maintenance, and metal finishing compliance requirements
• Consult applicable aviation maintenance authority guidelines before operational use

Typical Aircraft MRO / AOG Applications

• Aluminum aircraft skin and structural component preparation
• Pre-painting treatment of airframe aluminum surfaces
• Corrosion protection for machined aluminum parts
• Maintenance surface restoration during AOG turnaround operations
• Landing gear aluminum component surface conditioning

Compatibility & Safety Notes

• Recommended for aluminum and aluminum alloy substrates
• Surface must be chemically cleaned prior to application using compatible phosphoric acid–based cleaners
• Operators should wear rubber gloves, goggles, and protective aprons
• Provide adequate ventilation when handling chromic acid–containing solutions
• Rinse thoroughly after treatment to prevent blistering or corrosion under paint films
• Do not allow coating chemical to dry on metal surfaces during treatment

Packaging & Procurement

• Supplied in industrial chemical containers suitable for brush or immersion process use
• Storage should prevent freezing; thaw and mix thoroughly if crystallization occurs
• Easy-to-apply solution supports both small-scale and production-level metal finishing operations

Why ALODINE 1201 is Chosen for AOG / MRO

• Fast processing cycle supporting urgent aircraft maintenance requirements
• Reliable corrosion barrier formation for aluminum structures
• Flexible brush or immersion application
• Proven industry adoption for cost-effective surface protection
• Helps maintain paint system integrity in harsh operational environments

Practical Suggestions for Your Team (AOG Mindset)

• Keep product stock available for emergency maintenance readiness
• Train technicians to maintain treatment time between 2 and 5 minutes
• Ensure surface cleaning is complete before coating application
• Prepare fresh solution batches for immersion baths when contamination is suspected
• Monitor rinsing quality to reduce post-paint corrosion risks

Manufacture / Aviation Spec Codes

• Manufacturer: Henkel Corporation
• Product Identification: N/A – refer to distributor catalog listing
• Military Specification: Not formally listed; used in accordance with general chromate conversion coating process standards
• Export Compliance Code: Subject to regional chemical handling regulations

Alternative Names & Descriptions

• Chromate conversion coating chemical
• Aluminum chromic acid surface treatment
• ALODINE chromate coating solution
• Aluminum corrosion conversion coating
• Chromate pre-paint treatment chemical