74-451-207 (0.5-Pint-Tin)

FASTboot™ Primer

Overview

FASTboot™ Primer is a pressure-sensitive adhesive (PSA) primer developed by Goodrich (Collins Aerospace) for the installation and repair of FASTboot™ pneumatic de-icers. The primer activates the PSA adhesive layer to ensure reliable bonding of de-icer boots and repair patches to aircraft surfaces. Supplied as either a liquid or convenient primer pen, it is intended for aircraft de-icing system maintenance and should be inspected before use to confirm product condition.

Key Technical Specs

• Product Type: Pressure-sensitive adhesive (PSA) primer
• Product Name: FASTboot™ Primer
• Appearance: Clear to amber liquid
• Odour: Solvent odour
• Application Method: Primer pen or liquid application
• Purpose: Activates PSA adhesive prior to de-icer installation
• Inspection Requirement: Check for clouding, precipitation or primer degradation before use
• Storage: Store according to manufacturer recommendations and inspect before application

Approvals & Specifications

• Manufactured by Goodrich Corporation (Collins Aerospace)
• Designed for FASTboot™ pneumatic de-icer repair systems
• Used with approved Goodrich pneumatic de-icer maintenance products

Typical Applications

• Installation of FASTboot™ pneumatic de-icers
• Repair of aircraft pneumatic de-icer systems
• Activation of pressure-sensitive adhesive before bonding
• Application of neoprene, Estane® and silver Estane® repair patches
• Aircraft de-icing system maintenance
• OEM and aircraft MRO operations

Key Features & Benefits

• Activates pressure-sensitive adhesive for dependable bonding.
• Designed specifically for FASTboot™ de-icer repair systems.
• Available in both liquid and primer pen formats.
• Simple application for field and workshop maintenance.
• Supports reliable adhesion of de-icer boots and repair patches.
• Ideal for aircraft de-icing maintenance operations.
• Easy visual inspection helps determine product usability before application.

Application Guidelines

• Shake the primer well before use.
• Apply to clean, dry bonding surfaces before installing the pressure-sensitive adhesive component.
• Allow the primer to flash off as specified in the applicable maintenance procedure.
• For primer pens, ensure the tip remains moist with primer during use.
• Seal the pen or container immediately after use to minimise solvent loss and contamination.
• Inspect for cloudiness or precipitation before application and discard degraded material.

Compatibility & Limitations

• Designed specifically for FASTboot™ pneumatic de-icer systems.
• Compatible with approved neoprene, Estane® and silver Estane® repair patches.
• Should only be used with approved Goodrich de-icer repair procedures.
• Do not use primer showing cloudiness, precipitation or other signs of degradation.

Packaging & Procurement

• 74-451-207: 1/2 pint FASTboot™ Primer
• 74-451-206: 2 oz FASTboot™ Primer (Primer Pen)
• Available through Collins Aerospace / Goodrich authorised distributors

Why This Product is Chosen for AOG / MRO

• Provides rapid activation of PSA adhesive during de-icer repairs.
• Supports reliable bonding in field maintenance environments.
• Convenient primer pen simplifies small repair tasks.
• Specifically engineered for approved aircraft de-icing systems.
• Helps minimise aircraft downtime during de-icer replacement.

Practical Suggestions for Your Team (AOG Mindset)

• Inspect the primer before every use for cloudiness or precipitation.
• Shake the primer thoroughly before application.
• Keep containers and primer pens tightly sealed when not in use.
• Use only with approved FASTboot™ repair procedures.
• Perform bonding operations on clean, dry surfaces for optimum adhesion.

Manufacturer / Aviation Spec Codes

• Product Name: FASTboot™ Primer
• Manufacturer: Goodrich Corporation (Collins Aerospace)
• Product Type: Pressure-sensitive adhesive primer
• Part Numbers: 74-451-207, 74-451-206
• Application: FASTboot™ pneumatic de-icer systems