CAAPCOAT CAAPCOAT-FP-200#16515 (1-USgl-Kit)

CAAPCOAT® FP-200 Color Matched Gloss Rain Erosion Coating

Overview

CAAPCOAT® FP-200 is a two-component, room-temperature curing polyurethane elastomer developed to protect aircraft radomes, antennas and leading edges from high-speed rain erosion. The coating combines outstanding erosion resistance with colour-matching capability for both military camouflage and commercial aesthetic applications. It can also be overcoated with CAAPCOAT® FP-050 to achieve a low-lustre finish while maintaining the proven rain erosion protection associated with CAAPCOAT polyurethane systems.

Key Technical Specs

• Product Type: Two-component polyurethane elastomer rain erosion coating
• Finish: Gloss, colour matched
• Application: Aircraft radomes, antennas and leading edges
• Spray Viscosity: 22-28 seconds (Zahn #2)
• Recommended Dry Film Thickness: 11-13 mils
• Coverage: 25-30 ft� per gallon at 11-13 mil DFT
• Film Density: 1.25 g/cc
• Application Conditions: 60-80°F (16-27°C), 40-70% RH
• Ambient Cure: 2-3 days
• Accelerated Cure: 24-hour ambient cure followed by 3 hours at 150°F (66°C)

Approvals & Specifications

• Manufactured using the same materials and production methods as CAAPCOAT® C-W4 White Polyurethane Rain Erosion Coating
• CAAPCOAT® C-W4 meets AMS-C-83445A (MIL-C-83445A) Class 1 Quality Conformance Inspection requirements
• Available in most Federal Standard 595C gloss colours used throughout the aerospace industry

Typical Applications

• Aircraft radomes
• Leading edge protection
• Aircraft antennas
• Military camouflage coating systems
• Commercial aircraft exterior erosion protection
• Repair and refurbishment of rain erosion resistant coatings

Compatibility & Safety Notes

• All substrates must be primed before application
• Aeroglaze® 9947 Wash Primer is the recommended primer for optimum adhesion and future repairability
• Do not sand or solvent wipe the primer before topcoating
• Ground all metal equipment and aircraft components during spraying to prevent static discharge
• Use only with adequate ventilation and keep away from ignition sources
• Contains flammable solvents including methyl isobutyl ketone (MIBK), xylene and less than 1% free isocyanate
• Do not store above 38°C (100°F)

Packaging & Procurement

• FP-200 Colour Matched Gloss Polyurethane (1 gallon)
• Curing Agent (144 g)
• Accelerator (200 g)
• PUT-10 Polyurethane Thinner (� gallon)
• Quart Kit including Aeroglaze® 9947 Wash Primer

Why This Product is Chosen for AOG / MRO

• Provides exceptional protection against high-speed rain erosion on critical aircraft surfaces
• Colour-matched finish supports both military and commercial fleet requirements
• Can be repaired and refinished using approved primer systems
• Fast multi-coat application enables complete coating build within one working shift
• Optional low-lustre overcoat provides additional flexibility for specialised aircraft finishes
• Proven coating technology derived from AMS-C-83445A compliant CAAPCOAT systems

Practical Suggestions for Your Team (AOG Mindset)

• Prepare surfaces thoroughly by sanding or grit blasting before priming
• Apply Aeroglaze® 9947 Wash Primer at 0.5-1.0 mil before applying FP-200
• Apply multiple thin coats with 5-20 minutes flash-off between coats to achieve the required film build
• Monitor spray viscosity during application as the activated material thickens over time and additional thinner may be required
• Use smaller quantities of accelerator when longer pot life is required for complex repairs
• Clean spray equipment immediately after use with acetone or MEK to prevent cured material buildup

Manufacturer / Aviation Spec Codes

• Manufacturer: CAAP Co., Inc.
• Product Name: CAAPCOAT® FP-200 Color Matched Gloss Rain Erosion Coating
• Product Type: Two-component polyurethane elastomer rain erosion coating
• Recommended Primer: Aeroglaze® 9947 Wash Primer
• Reducer: PUT-10 Polyurethane Thinner
• Related Specification: AMS-C-83445A (MIL-C-83445A) Class 1 (via CAAPCOAT® C-W4 manufacturing system)
• Primary Application: Aircraft radomes, antennas and leading edge protection