AkzoNobel - Aerodur AERODUR-LV2114/CS6022/TR114 (2-USGL-KIT)

Additional Product Information

Overview

Aerodur LV 2114 is a low VOC epoxy primer engineered for aircraft exterior surfaces. Designed for aerospace maintenance, repair, and overhaul (MRO), it delivers exceptional corrosion protection, Skydrol resistance, and optimal adhesion for exterior urethane coatings. Teams rely on it for fast, reliable, and environmentally compliant priming during routine maintenance or urgent AOG repairs.

Key Technical Specs for Aerodur LV 2114

• Type: Corrosion inhibiting epoxy primer, VOC-exempt solvent based
• Size/Volume: Mixed ratio 2:1:1 (Base:Curing Solution:Thinner)
• Color: Yellow
• Viscosity/Consistency: 14 18 sec Zahn-Cup 2; 16 28 sec ISO-Cup 4 (2:1:1 mix)
• Cure/Working Time: Pot life 3 hours at 25 C (77 F); Induction time 15 minutes
• Tensile/Peel Strength: Optimizes adhesion for exterior urethane topcoats
• Shore Hardness: Not specified; designed for primer layer flexibility
• Service Temperature: 15 35 C (59 95 F) operating range; humidity 35 75%
• Typical Uses: Direct-to-metal priming, corrosion protection, MRO and exterior coating preparation
• Shelf Life: 12 months for Base, CS6022, TR-114; 24 months for TR-102

Approvals & Specifications

• SAE AMS 3095A qualified
• VOC compliance: Max 345 g/l USA; Max 588 g/l Europe (with exempt solvents)
• Check QPL (Qualified Product List) at AkzoNobel Aerospace for updates

Typical Aircraft MRO / AOG Applications

• Fuselage and wing surface priming
• Control surfaces maintenance coating
• Preparation layer for urethane or epoxy topcoats
• Direct-to-metal corrosion protection during AOG repair

Compatibility & Safety Notes

• Compatible with bare aluminum, treated metals, and pretreated surfaces
• Surface preparation via Metaflex SP 1050 or Scotch-Brite abrasion with solvent clean
• PPE recommended: gloves, goggles, and protective clothing
• Ensure adequate ventilation during application

Packaging & Procurement

• Available in standard aerospace base kits with CS6022 curing solution and TR-114 or TR-102 thinners
• Storage: 5 38 C (40 100 F), dry and in original containers
• Single uniform wet coat achieves 15 25 m (0.6 1.0 mil) dry film thickness
• Easy to mix and spray using conventional or electrostatic methods

Why Aerodur LV 2114 is Chosen for AOG / MRO

• Fast drying and quick recoat capabilities reduce aircraft downtime
• High reliability for consistent adhesion and corrosion protection
• Versatile for different spray methods and environmental conditions
• Portable and easy to handle in maintenance hangars or remote locations

Practical Suggestions for Your Team (AOG Mindset)

• Maintain stocked kits of base, curing solution, and TR-114 thinner for urgent repairs
• Pre-test spray settings on panels to optimize finish quality
• Train staff in correct mixing ratio and induction time for consistent results
• Use in controlled humidity and temperature conditions when possible

Manufacture / Aviation Spec Codes

• Manufacturer: AkzoNobel Aerospace Coatings
• Product ID: Aerodur LV 2114
• OEM/MIL/Export Codes: SAE AMS 3095A, QPL referenced at AkzoNobel Aerospace

Alternative Names & Descriptions

• Aerodur LV 2114 Epoxy Primer
• AkzoNobel LV 2114 Low VOC Primer
• Aerodur 2114 Maintenance Primer
• LV 2114 Skydrol Resistant Primer
• Aerodur Corrosion Inhibiting Epoxy Primer