AkzoNobel A9004 (417-ML-CAN)

Additional Product Information

Overview

Aerodur 3001 is a chemically cured polyurethane aerospace base coat designed for long-life exterior aircraft finishing. Used in aviation manufacturing and maintenance, this coating delivers uniform solid color coverage, improved chemical resistance, and superior weathering protection. Aviation and MRO teams rely on this system for reduced production cycle time, high durability, and consistent decorative performance when paired with the recommended clear coat system.

Key Technical Specs for Aerodur 3001 Base Coat

• Type: Polyurethane chemically cured aerospace base coat
• Size / Volume: Available in OEM-specified container formats
• Color: Solid colors as specified by aircraft finishing requirements
• Viscosity / Consistency: 20–65 seconds Zahn Cup #2 (77°F / 25°C) or 27–80 seconds ISO Cup #4
• Cure / Working Time (Pot Life): Approximately 1–3 hours depending on activator selection and environmental conditions
• Service Temperature: Designed for exterior aircraft operational environments under aerospace coating standards
• Typical Uses: Exterior aircraft fuselage, wing surfaces, structural decorative finishing, and maintenance repainting

Approvals & Specifications

• BAMS 565-018
• Boeing BMS 10-125 Type IV Grade D
• Boeing BMS 10-125 Type VII Grade D
• Boeing BMS 10-72 Type X
• DHMS C4.30
• MEP 10-125 Type II
• CMS-CT-102
• MM1279
• Irkut 741.140/21-00-00-0038-0T04/0A

Typical Aircraft MRO / AOG Applications

• Commercial aircraft exterior repainting and maintenance repair
• Fuselage solid color finishing
• Wing and control surface coating restoration
• Touch-up painting during AOG events
• OEM aircraft production finishing systems

Compatibility & Safety Notes

• Compatible with approved aerospace primers including polyurethane and epoxy primer systems
• Surface must be clean, abraded to matte finish using P320 sandpaper or equivalent nonwoven abrasive pad
• Remove oil, grease, and contamination using isopropyl alcohol before application
• Wear appropriate aerospace coating PPE and follow MSDS safety guidance
• Allow material to acclimatize to room temperature before mixing and application

Packaging & Procurement

• Supplied in OEM-qualified aerospace coating containers
• Mixing ratio (volume): 6 parts base material : 1 part curing solution : 0.5 part activator
• Optional TR-114 thinner addition below 15% of mixed product volume
• Recommended storage temperature: 5–38°C (41–100°F) in original sealed containers

Why Aerodur 3001 Base Coat is Chosen for AOG / MRO

• Fast drying characteristics help reduce aircraft downtime during maintenance
• Excellent chemical and stain resistance improves operational durability
• High flexibility supports structural surface movement without coating failure
• Compatible with multiple spray technologies including HVLP and electrostatic systems
• Provides high gloss potential when used with Aerodur 3002 clear coat system

Practical Suggestions for Your Team (AOG Mindset)

• Maintain stock of recommended activators for different environmental conditions
• Prepare test panels when using new spray equipment or working outside standard humidity ranges
• Ensure equipment cleaning immediately after application due to fast-drying formulation
• Follow recommended film thickness range of 25–75 µm (1.0–3.0 mils)
• Allow recoat window of 2–72 hours under standard conditions

Manufacture / Aviation Spec Codes

• Manufacturer: AkzoNobel Aerospace Coatings
• Product Group: Aerospace polyurethane topcoat system
• Export / OEM Codes: Aerodur 3001GXXXXX series
• Activator Options: CS6000 curing solution, A9002, A9003, A9004 activators

Alternative Names & Descriptions

• Aerodur 3001 Solid Color Aerospace Basecoat
• Polyurethane Aircraft Exterior Base Coat
• Aerospace Box Coat Finishing System
• Aircraft Solid Color Protective Coating
• Aerodur 3001G Series Base Material