P 80 (0.26 US gal / 1 Ltr Tin)

P-80® Temporary Rubber Assembly Lubricants

Overview

P-80® Temporary Rubber Assembly Lubricants are ester-based, water-blend assembly lubricants developed by International Products Corporation for installing rubber and soft plastic components. Designed to reduce friction during assembly and then dry without re-lubricating, P-80® helps parts slide into place easily while maintaining tight final fits. The range includes liquid, gel, quick-drying and incidental food contact variants for rubber seals, O-rings, hoses, grommets, bushings, boots and other elastomeric assemblies.

Key Technical Specs

• Product Type: Temporary rubber assembly lubricant
• Technology: Synthetic ester and water emulsion
• Function: Reduces assembly friction, then dries to a non-reactivating condition
• Reduction of Friction:
  • P-80® Emulsion - approximately 70%
  • P-80® THIX - approximately 70%
  • P-80® Grip-It - approximately 40%
  • P-80® RediLube - approximately 55%
  • P-80® Emulsion IFC - approximately 70%
  • P-80® THIX IFC - approximately 70%
• Estimated Minimum Dry Time:
  • Grip-It and RediLube - 20 minutes
  • Emulsion and Emulsion IFC - 1 hour
  • THIX and THIX IFC - 2 hours
• Viscosity Range: 20-15,000 cps at 25°C depending on grade
• Shelf Life: 1-2 years depending on product
• Storage Temperature: 2°C to 30°C (36°F to 86°F)

Approvals & Specifications

• P-80® Emulsion IFC and P-80® THIX IFC are registered for incidental food contact applications
• IFC variants meet FDA 21 CFR 178.3570 requirements for lubricants with incidental food contact
• International Products Corporation is ISO 9001:2008 certified

Typical Applications

• Rubber O-ring installation
• Hose and fitting assembly
• Grommets, seals and sleeves
• Boots, bushings and mounts
• Threaded connectors and plugs
• Wire harness pull-through operations
• Rubber washers, mouldings and soft plastic parts
• Automotive, aerospace, industrial and appliance assembly operations

Compatibility & Safety Notes

• Compatible with many common elastomers, plastics and metals based on IPC compatibility testing
• Does not contain petroleum distillates, silicone or CFCs
• Once dry, will not re-lubricate even in the presence of water
• Do not dilute with water or mix with other chemicals
• Excess lubricant can be wiped or washed away with soap and water
• P-80® residue may discolour copper and copper alloys; user testing is recommended
• Always perform application-specific compatibility testing before production use

Packaging & Procurement

• Available in multiple grades: Emulsion, THIX, Grip-It, RediLube, Emulsion IFC and THIX IFC
• Supplied in small containers, jugs and drums depending on product and requirement
• Manufactured in the USA by International Products Corporation
• Available worldwide through IPC distribution channels

Why This Product is Chosen for AOG / MRO

• Reduces installation force and helps prevent component damage during assembly
• Improves ergonomics by reducing technician strain and repetitive-stress risk
• Temporary lubrication helps achieve tight final fits after drying
• Does not leave persistent slippery residue like soap, silicone or petroleum-based lubricants
• Supports faster assembly and fewer rejected parts
• Useful for rubber seals, hoses, grommets and vibration-isolation parts used across aircraft and support equipment

Practical Suggestions for Your Team (AOG Mindset)

• Use P-80® Emulsion or THIX where maximum friction reduction is required
• Select P-80® Grip-It or RediLube when faster drying is more important than maximum lubricity
• Use THIX gel grades for vertical surfaces or applications where run-off must be minimised
• Store containers sealed and use oldest stock first based on lot/date coding
• Stir or recirculate Emulsion grades before dispensing from drums; do not use air agitation
• Clean dispensing equipment regularly and do not return dispensed product to the original container

Manufacturer / Aviation Spec Codes

• Manufacturer: International Products Corporation
• Product Range: P-80® Temporary Rubber Assembly Lubricants
• Product Types: Emulsion, gel, quick-drying and incidental food contact assembly lubricants
• Technology: Ester-based temporary lubrication
• Primary Application: Rubber and soft plastic component assembly
• IFC Compliance: FDA 21 CFR 178.3570 for incidental food contact grades