LPS LPS COPPER ANTI-SEIZE (0.5-LB-BOTTLE)

LPS® Copper Anti-Seize Compound

Overview

LPS® Copper Anti-Seize is a high-temperature anti-seize and lubrication compound formulated to prevent galling, seizure, corrosion, and thread damage in demanding industrial and maintenance environments. Utilizing copper-based solids within a highly adhesive carrier system, the compound provides long-term protection against heat, moisture, corrosion, and dissimilar metal interaction while allowing fastener reuse and simplified maintenance operations.

Key Technical Characteristics

• Product Type: Copper-based anti-seize compound
• Appearance:
  • Aerosol: Gas
  • Bulk: Solid paste
• Color: Copper/Bronze
• Temperature Resistance: Up to 1093°C (2000°F)
• Flash Point:
  • Aerosol: >40°C
  • Bulk: 215°C
• Specific Gravity (Aerosol): 0.99
• Viscosity (Aerosol): 6600 cP at 25°C
• Water Solubility: Insoluble
• VOC Content:
  • Aerosol: 39.4%
  • Bulk: None
• Lead-Free Formulation

Core Performance Benefits

• Prevents seizure at temperatures up to 1093°C (2000°F)
• Protects against galling, rust, corrosion, and heat-freeze conditions
• Allows fasteners and fittings to be reused
• Reduces stud, bolt, and nut replacement costs
• Highly adhesive on both wet and dry surfaces
• Will not run, drip, or settle during storage or use
• Excellent performance on stainless steel components
• Helps prevent galvanic corrosion between dissimilar metals

Typical Applications

• Nuts and bolts
• Screws and studs
• Bushings
• Chains
• Engine components
• Flanges
• Heat exchangers
• Manifolds
• Furnaces
• Turbines
• Industrial maintenance assemblies

Material Engineering & Design Features

LPS® Copper Anti-Seize is formulated with copper-based lubricating solids that create a protective barrier between mating metal surfaces. The coating reduces friction, prevents metal-to-metal seizure, and maintains separability of threaded components even after prolonged exposure to elevated temperatures and corrosive environments.

Key design features include:

• Copper-based anti-seize technology
• High-temperature protection to 1093°C (2000°F)
• Excellent adhesion to metal surfaces
• Corrosion-resistant protective film
• Suitable for stainless steel and dissimilar metal assemblies
• Lead-free formulation

The product complies with:

• MIL-PRF-907E (non-aerosol version)

Installation & Handling

• Clean surfaces thoroughly before application
• For aerosol products, shake vigorously for approximately 30 seconds before use
• Apply a thin, even coating to all mating surfaces
• For aerosol application, hold can approximately 15-20 cm (6-8 inches) from the surface
• Reapply as required during maintenance intervals
• After aerosol use, clear spray valve by inverting the can and spraying until clear propellant emerges
• Not recommended for oxygen system applications

Environmental & Compliance Notes

• Lead-free formulation
• Store away from ignition sources and excessive heat
• Protect aerosol containers from temperatures above 50°C
• Store in well-ventilated areas
• Avoid puncturing, crushing, or incinerating aerosol containers
• Use appropriate personal protective equipment during handling
• Dispose of material in accordance with applicable regulations
• Consult the Safety Data Sheet (SDS) before use

Key Advantages

• Exceptional high-temperature anti-seize protection
• Prevents thread damage and component seizure
• Reduces maintenance costs through fastener reuse
• Excellent corrosion and galvanic protection
• Highly adhesive on wet and dry surfaces
• Suitable for stainless steel and mixed-metal assemblies
• Lead-free formulation supports modern environmental requirements
• Ideal for industrial, maintenance, power generation, and transportation applications