Vantage Specialty Chemicals BTR-130 (5-USGL-PAIL)

BTR-130 Belly Tape Remover

Overview

BTR-130 Belly Tape Remover is a thickened, ready-to-use solvent blend designed specifically for the removal of aircraft belly protection tapes such as 3M® 8641. It is engineered to cling to vertical and inverted surfaces, allowing extended contact time for effective penetration and softening of adhesive tape layers. The formulation is designed for aerospace use with low environmental and health impact characteristics.

Key Technical Specs

• Product Type: Thickened solvent-based aircraft tape remover
• Appearance: Clear to slightly hazy viscous liquid
• Odour: Mild citrus
• Specific Gravity (25°C): 0.95
• Viscosity (25°C): 4000 cps
• Vapour Pressure (20°C): 2 mmHg (calculated)
• Flash Point: 120°F
• pH: Neutral
• Formulation: Does not separate; no premixing required

Approvals & Testing

• Boeing BSS 7432 (paint softening / related testing)
• Douglas CSD #1
• ASTM F 519
• ASTM F 483
• ASTM F 1110
• ASTM F 502
• ASTM F 945
• ASTM F 485

Typical Applications

• Removal of aircraft belly protective tapes (e.g. 3M® 8641)
• Aerospace surface maintenance and refurbishment
• Adhesive residue softening and removal
• Paint system preparation during maintenance operations

Compatibility & Safety Notes

• Free from methylene chloride (MeCl), NMP, phenols, chromates, and acids
• Low environmental, health, and safety impact formulation
• Clings effectively to vertical and inverted aircraft surfaces
• May soften some topcoat areas during extended exposure
• Used material may present combustion risk if contaminated with paint residue
• Refer to Safety Data Sheet (SDS) before use

Application Guidance

• Apply directly without dilution (do not mix with water)
• Application methods: spray (preferred), brush, or flow coat
• Allow dwell time of 2-3 hours per application cycle
• Typically requires 3 application cycles for full removal
• Use high-pressure water, scraping, or approved tools to remove softened tape
• Final rinse recommended using high-pressure water or approved cleaners (e.g. B&B™ JET-7)

Packaging & Storage

• Supplied in drums and totes
• Shelf life: 12 months in sealed container
• Storage temperature: above 10°C (50°F)
• Protect from freezing and direct sunlight

Why This Product is Chosen for Aerospace Maintenance

• Effective removal of tough aerospace protective tapes
• Extended surface cling improves dwell efficiency on vertical structures
• Reduced environmental and hazardous chemical profile
• Compatible with standard aerospace maintenance processes

Practical Suggestions for Your Team

• Apply generously and allow full dwell time for penetration
• Reapply if product dries before full tape softening occurs
• Plan for multiple cycles in standard removal procedures
• Use controlled high-pressure rinsing to avoid surface damage

Manufacturer / Application Codes

• Product Name: BTR-130 Belly Tape Remover
• Manufacturer: Vantage Specialties, Inc.
• Application: Aerospace adhesive tape removal
• Function: Solvent-based surface cleaning and decontamination