HUMISEAL HumiSeal Thinner T600 (5-LTR-CAN)

HumiSeal® Specialty Solvent Based Thinners

Overview

HumiSeal® Specialty Solvent Based Thinners are formulated solvent blends designed to adjust the viscosity of compatible HumiSeal® conformal coatings for application requirements. These thinners maintain the original coating system performance characteristics while providing controlled application properties. They are compliant with applicable North American air quality regulations and the RoHS Directive 2011/65/EC.

Key Technical Specs

• Product Type: Solvent-based coating thinners
• Colour: Clear
• Shelf Life: 24 months
• VOC Range: 0-969 g/L depending on thinner type
• Flash Point Range: -1°C to 47°C (TCC)
• Application: Viscosity adjustment of HumiSeal® coatings

Available Thinner Grades & Properties

• Thinner 24: Evaporation rate 3.62, VOC 847 g/L, boiling point 82°C
• Thinner 600: Evaporation rate 0.37, VOC 969 g/L, boiling point 141°C
• Thinner 604: Evaporation rate 0.30, VOC 930 g/L, boiling point 141°C
• Thinner 605: Evaporation rate 3.18, VOC 702 g/L, boiling point 98°C
• Thinner 701: Evaporation rate 1.33, VOC 127 g/L, boiling point 140°C
• Thinner 704: Evaporation rate 1.26, VOC 0 g/L, boiling point 140°C
• Thinner 800: Evaporation rate 2.78, VOC <17 g/L, boiling point 98°C
• Thinner 801: Evaporation rate 2.04, VOC 250 g/L, boiling point 119°C

Compatible HumiSeal® Coatings

• HumiSeal® 1A65
• HumiSeal® 1A67
• HumiSeal® 1B31 series
• HumiSeal® 1B73 series
• HumiSeal® 1R32A-2
• HumiSeal® 1A33
• HumiSeal® 1B66LOC
• HumiSeal® 1B31LSE
• HumiSeal® 1B73LSE
• Other specified compatible HumiSeal® systems

Typical Applications

• Adjusting conformal coating viscosity before application
• Optimising spray, brush, or dip coating processes
• Maintaining coating flow and finish quality
• Aerospace, electronics, and industrial protective coating applications

Application Guidelines

• Add compatible HumiSeal® thinner gradually to the coating system
• Mix until the required application viscosity is achieved
• Only use the thinner specified as compatible with the coating system
• Follow coating manufacturer application instructions

Compatibility & Safety Notes

• Flammable solvent products - handle with appropriate precautions
• Use only in well-ventilated areas
• Wear suitable protective gloves and eye protection
• Avoid prolonged inhalation of vapours
• Wash exposed skin with water after contact
• Flush eyes with water and seek medical attention if required
• Dispose of unused material according to applicable regulations

Why This Product is Chosen for Aerospace / Electronics Applications

• Maintains original HumiSeal® coating performance characteristics
• Provides controlled viscosity adjustment for application processes
• Available in multiple evaporation profiles for different coating requirements
• Supports reliable conformal coating application quality

Practical Suggestions for Your Team

• Select thinner type based on coating compatibility and required drying speed
• Avoid over-thinning, which may affect coating performance
• Maintain good ventilation during mixing and application
• Store containers sealed and away from ignition sources

Manufacturer / Product Codes

• Product Name: HumiSeal® Specialty Solvent Based Thinners
• Product Types: Thinner 24, 600, 604, 605, 701, 704, 800, 801
• Manufacturer: HumiSeal® / Chase Corporation
• Application: Viscosity adjustment for conformal coatings