ARROWIPE-AQUA-WIPES-C836 (300-WIPE-TUB)

Arrowipe Aqua Wipes C836

Overview

Arrowipe Aqua Wipes C836 are aqueous, non-flammable, low VOC, low odour and low lint wipes designed for general cleaning and degreasing of hard surfaces and tools. They are also formulated for the removal of wet and semi-cured sealants, oils, greases and general contamination. The pre-moistened wipe format provides controlled dosing, reduces the risk of spillage and helps minimise cross-contamination during aircraft and industrial maintenance operations.

Key Technical Specs

• Product Type: Aqueous cleaning and degreasing wipes
• Primary Uses: General surface and tool cleaning, degreasing and sealant removal
• Odour: Detergent
• Solubility: Soluble in water
• Flammability: Non-flammable
• Cloth Thickness: 45 g/m²
• VOC Content: 87 g/L
• Flash Point: Not applicable
• Low Linting: Yes
• Pack Size: 300 wipes

Approvals & Specifications

• NSF (A1): 169258
• OMat 1/24AT
• ASTM F 945-12
• Rail Cat No. 007/079108
• Rolls-Royce CSS204 Type A
• Rolls-Royce CSS204 Type C
• Rolls-Royce CSS204 Type D
• Rolls-Royce MLC104

Typical Aircraft MRO / AOG Applications

• Wipe degreasing of aircraft and general hard surfaces
• Cleaning of maintenance tools and equipment
• Removal of oils, grease and general dirt residues
• Removal of wet sealants
• Removal of semi-cured sealants
• Pre-cleaning surfaces prior to further maintenance or processing
• General cleaning applications in aircraft MRO environments

Compatibility & Safety Notes

• Suitable for cleaning hard surfaces and tools
• Non-flammable formulation reduces fire risk during routine cleaning operations
• Low VOC formulation helps reduce solvent exposure compared with conventional solvent-based cleaning products
• Low linting construction helps minimise fibre contamination on cleaned surfaces
• Use on compatible substrates in accordance with applicable maintenance procedures
• Allow cleaned surfaces to dry after wiping
• Refer to the Safety Data Sheet (SDS) before handling

Application Instructions

• Withdraw one wipe and immediately reseal the container
• Fold the wipe into four sections to provide multiple clean wiping surfaces
• Wipe the surface to remove oil, sealant, dirt and grease residues
• Re-fold the wipe after each pass to expose an uncontaminated surface
• Continue wiping until three consecutive passes show no visible contamination
• Allow the cleaned surface to dry

Packaging & Procurement

• Pack Size: 300 wipes
• Pre-moistened wipe format for controlled application
• Wipes format reduces the risk of spillage during handling
• Measured dosing helps reduce unnecessary product consumption

Why This Product is Chosen for AOG / MRO

• Rapid and convenient wipe-based cleaning for maintenance environments
• Suitable for removing oils, grease and general contamination
• Effective on wet and semi-cured sealants
• Non-flammable formulation improves handling safety
• Low VOC, low odour and low lint characteristics support controlled maintenance environments
• Pre-moistened format reduces the risk of spillage and cross-contamination
• Recognised against multiple aerospace and industrial specifications

Manufacturer / Aviation Spec Codes

• Product Name: Arrowipe Aqua Wipes C836
• Product Type: Aqueous, non-flammable cleaning and degreasing wipes
• Manufacturer: Arrow Solutions
• Applications: General cleaning, degreasing and wet or semi-cured sealant removal
• Approvals / Specifications: NSF (A1) 169258, OMat 1/24AT, ASTM F 945-12, Rolls-Royce CSS204 Types A, C and D, Rolls-Royce MLC104