ARROWIPE-SOLVE-NF (400-WIPE-TUB)

Arrowipe Solve NF C921

Overview

Arrowipe Solve NF C921 is a non-flammable, aqueous-based cleaning wipe formulated for the removal of grease, oil, sealant, grime, and general dirt residues from a range of aerospace and industrial surfaces. The pre-moistened wipes provide controlled application, reduced risk of spillage, and lower potential for cross-contamination. The product is NSF approved and Rolls-Royce approved for aerospace maintenance applications.

Key Technical Specs

• Product Type: Non-flammable aqueous-based cleaning wipes
• Formulation: Blend of aqueous-based solvents
• Appearance: Clear / Colourless
• VOC Content: 135 g/L (13.5% w/w)
• Odour: Mild
• Wipe Material: Low-lint 55 gsm
• Flammability: Non-flammable
• Solubility: Soluble in water
• Packaging: 400 wipes

Approvals & Specifications

• Rolls-Royce MLC104 - New Product Approved Materials / Consumables
• Rolls-Royce CSS255 Type A - All including paints
• Rolls-Royce CSS255 Type B - Non-metallics
• Rolls-Royce CSS255 Type D - Prior penetrant
• Rolls-Royce CSS255 Type E - Wipes for non-metallics
• Rolls-Royce CSS226 - Wipe Material
• Rolls-Royce OMAT - Maintenance, Repair and Overhaul (MRO)
• ASTM F 945 22 - Stress corrosion cracking
• NSF A1 - Registration No. 172809
• UK Rail Cat No. 007/079111

Typical Applications

• Aircraft component cleaning and preparation
• Removal of grease and oil deposits
• Removal of sealant residues
• Removal of general dirt and grime
• Cleaning aerospace surfaces prior to maintenance or inspection
• Aircraft Maintenance, Repair and Overhaul (MRO) operations
• Cleaning metallic and non-metallic aerospace surfaces
• General industrial cleaning and degreasing applications

Compatibility & Safety Notes

• Suitable for use on a range of aerospace and industrial surfaces
• Approved for applications involving painted surfaces under Rolls-Royce CSS255 Type A
• Approved for non-metallic applications under Rolls-Royce CSS255 Type B
• Suitable for use prior to penetrant processes under Rolls-Royce CSS255 Type D
• Low VOC formulation helps reduce solvent emissions
• Non-flammable formulation reduces fire risk during handling and application
• Low-odour formulation improves user comfort
• Low-lint wipe construction helps minimise surface contamination
• Refer to the Safety Data Sheet (SDS) before use

Application & Usage

• Withdraw one wipe from the container and reseal immediately
• Fold the wipe into four sections to provide multiple clean wiping surfaces
• Wipe over the surface to remove oil, sealant, dirt, grease, and other residues
• Use a clean section of the wipe as required during the cleaning process
• Dispose of used wipes in accordance with applicable site and environmental procedures

Packaging & Procurement

• Pack Size: 400 pre-moistened wipes
• Wipe Format: Low-lint, pre-dosed cleaning wipes
• Measured dosing helps control product consumption
• Wipe format reduces the risk of spillage during application
• Resealable container helps maintain product integrity between uses

Why This Product is Chosen for AOG / MRO

• Rolls-Royce approved for aerospace maintenance applications
• Non-flammable formulation improves handling safety in maintenance environments
• Ready-to-use wipe format enables rapid cleaning without mixing or dilution
• Low-lint construction helps minimise contamination of cleaned surfaces
• Effective removal of grease, oil, grime, and sealant residues
• Controlled dosing reduces product waste and cross-contamination risks
• Compact wipe format is practical for aircraft maintenance and confined work areas

Practical Suggestions for Your Team (AOG Mindset)

• Reseal the container immediately after removing each wipe
• Fold each wipe into four sections to maximise usable clean surfaces
• Use a fresh wipe when contamination levels are high
• Avoid reusing heavily contaminated wipes to prevent transferring residues
• Keep the container closed when not in use
• Confirm surface compatibility and process requirements before use on critical components
• Follow the applicable aircraft manufacturer maintenance procedure and approved cleaning process

Manufacturer / Aviation Spec Codes

• Product Name: Arrowipe Solve NF C921
• Product Type: Non-flammable aqueous-based cleaning wipe
• Manufacturer: Arrow Solutions
• Rolls-Royce Approvals: MLC104, CSS255 Types A, B, D and E, CSS226, OMAT
• Testing: ASTM F 945 22
• NSF Registration: A1, No. 172809
• Application: Aerospace cleaning, degreasing, component preparation and MRO