BOESHIELD-T-9 (4-OZ-Aerosol)

Additional Product Information

Overview

Boeshield T-9 (LIQUID) is a high-performance corrosion protection and lubrication treatment designed for aviation maintenance, repair, and overhaul (MRO) environments. It is widely trusted by technical teams for safeguarding metallic components exposed to moisture, salt spray, and operational wear. The formula penetrates deeply into metal substrates, displaces water, and cures to a dry, wax-like protective barrier that resists dirt accumulation while maintaining mechanical mobility of treated parts.

Key Technical Specs for Boeshield T-9 (LIQUID)

• Type: Corrosion inhibitor and lubricating protective coating
• Size/Volume: Available in procurement and industrial packaging formats (confirm pack size during ordering)
• Color: Clear amber liquid
• Viscosity/Consistency: 6 centistokes at 75°F ±1°F (23.9°C ±0.5°C)
• Cure/Working Time: Forms protective dry film after application; drying time varies with environmental conditions
• Service Temperature: Effective adhesion stability down to -40°F (-40°C)
• Typical Uses: Corrosion prevention, metal surface lubrication, moisture displacement, and long-term storage protection

Approvals & Specifications

• FED-STD-791, Method 4001 – Corrosion resistance performance (maximum 3 dots ≤1 mm per 10 sq in after 100-hour salt spray test)
• ASTM G-34 – Exfoliation corrosion resistance validation
• MIL-C-16173D Paragraph 46.11 – No visible pitting, mottling, or staining under testing conditions
• VOC Content: 24.5%
• Flash Point: Approximately 129°F (54°C) using TCC method

Typical Aircraft MRO / AOG Applications

• Protection of control cables, linkages, and hinge assemblies
• Threaded fastener corrosion prevention during maintenance cycles
• Avionics bay metal surface moisture protection
• Landing gear auxiliary metal components
• Storage preservation of aircraft tooling and spare parts
• Surface treatment for exposed structural metallic interfaces

Compatibility & Safety Notes

• Compatible with most ferrous and non-ferrous metals including steel and aluminum alloys
• Application surfaces should be clean and dry for optimal penetration
• Use appropriate PPE including gloves and eye protection during handling
• Remove using aliphatic naphtha or approved cleaning solvents when rework is required
• Avoid application near open flames due to flash point characteristics

Packaging & Procurement

• Coverage Efficiency: Approximately 500 – 1000 sq ft per gallon (46 – 93 m² per 3.78 L) depending on surface porosity
• Procurement Packs: Industrial bulk and maintenance supply packaging available
• Storage: Store in sealed containers in cool, dry environments away from direct heat
• Application Method: Spray, brush, or dip treatment for operational flexibility

Why Boeshield T-9 (LIQUID) is Chosen for AOG / MRO

• Rapid penetration into tight mechanical joints and micro-clearances
• Long-term corrosion inhibition reduces unscheduled maintenance events
• Lightweight protective film does not interfere with mechanical motion
• Suitable for emergency AOG protection deployment
• High coverage efficiency supports cost-effective fleet maintenance

Practical Suggestions for Your Team (AOG Mindset)

• Keep emergency maintenance stock in controlled storage for immediate deployment
• Train maintenance technicians on proper spray or brush application techniques
• Inspect treated assemblies during scheduled maintenance intervals
• Reapply after cleaning cycles or exposure to severe moisture environments

Manufacture / Aviation Spec Codes

• Manufacturer: BoatLIFE / Advanced corrosion protection formulation
• Product ID: Boeshield T-9 Liquid Series
• Military Specification Compatibility: MIL-C-16173D aligned performance standards
• Export / Industry Reference Codes: Corrosion inhibitor protective coating solution

Alternative Names & Descriptions

• Boeshield T9 corrosion protector
• T-9 liquid corrosion inhibitor lubricant
• Water-displacing metal protection spray
• Aviation corrosion prevention treatment
• Long-term metal preservative coating