Babbco DR60 (500-ML-AEROSOL)

DR-60 Remover-Cleaner for Liquid Penetrant Inspection (LPI)

Overview

DR-60 is a hydrocarbon-based remover and cleaner designed for use in liquid penetrant inspection (LPI) processes. Manufactured by Sherwin, it is primarily used to remove excess penetrant from component surfaces while preserving penetrant trapped within discontinuities for accurate non-destructive testing (NDT). In addition to penetrant removal, DR-60 is an effective cleaner for removing oils, grease and other contaminants from metal surfaces, making it suitable for aerospace manufacturing, maintenance and inspection operations.

Key Technical Specs

• Product Type: Penetrant remover and surface cleaner
• Product Name: DR-60
• Technology: Hydrocarbon-based solvent cleaner
• Appearance: Colourless liquid
• Flash Point: 41°C
• Compatible Inspection Method: Liquid Penetrant Inspection (LPI)
• Companion Products: Compatible with all Sherwin penetrants

Approvals & Specifications

• Designed for aerospace Liquid Penetrant Inspection (LPI) processes
• Compatible with all Sherwin penetrant systems
• Suitable for aerospace non-destructive testing (NDT) applications

Performance Highlights

• Effectively removes excess penetrant without flushing flaws when used correctly
• Excellent cleaner for oily and contaminated surfaces
• Very low halogen content
• Very low sulphur content
• Compatible with all metals, ceramics and selected synthetic materials
• Fast evaporating to support efficient inspection processes

Typical Applications

• Removal of excess penetrant during LPI inspections
• Cleaning aerospace components before penetrant inspection
• General degreasing of oily metal surfaces
• Maintenance and overhaul cleaning operations
• Preparation of components for non-destructive testing

Compatibility & Safety Notes

• Compatible with all metals and ceramic materials
• Suitable for certain synthetic materials
• Use sparingly during penetrant removal to avoid washing penetrant from defects
• Do not spray directly onto the component when removing excess penetrant
• Allow complete evaporation before applying penetrant or developer
• Refer to the Safety Data Sheet (SDS) before handling

Application & Curing

• General Cleaning: Saturate contaminated surface and allow 10-30 seconds before wiping clean
• Penetrant Pre-Cleaning: Clean thoroughly and allow complete evaporation before applying penetrant
• Penetrant Removal: Remove excess penetrant with a dry cloth before lightly wiping with DR-60-moistened cloth
• Do not flood or spray directly onto inspection surfaces during penetrant removal
• Allow the surface to dry completely before applying developer

Packaging & Procurement

• Available through Sherwin / NDT Europa distribution network
• Supplied in multiple commercial container sizes depending on regional availability
• Compatible with the complete Sherwin penetrant inspection product range

Why This Product is Chosen for AOG / MRO

• Essential for reliable aerospace liquid penetrant inspection processes
• Effectively removes surface penetrant while maintaining defect sensitivity
• Low halogen and sulphur content supports aerospace material compatibility
• Can also be used as a general-purpose maintenance cleaner
• Supports accurate and repeatable NDT inspections

Practical Suggestions for Your Team

• Always remove as much penetrant as possible with a dry cloth before using DR-60
• Use only a lightly moistened cloth to avoid over-cleaning inspection areas
• Allow complete evaporation before applying penetrant or developer
• Store between 0°C and 50°C in tightly closed containers
• Protect the product from moisture during storage

Manufacturer / Aviation Spec Codes

• Product Name: DR-60 Remover-Cleaner
• Manufacturer: Sherwin (USA) / NDT Europa (Netherlands)
• Product Type: Hydrocarbon-based penetrant remover
• Primary Application: Liquid Penetrant Inspection (LPI) cleaning and penetrant removal
• Compatible System: Sherwin Penetrant Inspection Products