ESGARD-PL-3 (1-USgl-Ctnr)

Additional Product Information

Overview

ESGARD PL-3 is a soft, amber, water-displacing rust preventive film used to protect metal surfaces during manufacturing, storage, and shipment. It is relied upon in aviation and MRO operations for its dependable corrosion inhibition and ease of application, ensuring critical metal components remain corrosion-free while in service or transit.

Key Technical Specs for ESGARD PL-3

• Type: VOC-compliant blended oil
• Density: 7.6 lbs/gal (0.9 kg/l)
• Color: Amber
• Consistency/Viscosity: Soft, thin film
• Flash Point: 270 F (132 C) PMCC
• Volume Solids: 99%
• Coverage: 1,600 sq ft/gal at 1 mil (39.3 sq m/l at 25 microns)
• Dry Time: Tacky, oily film
• Typical Uses: Corrosion prevention for bare steel, phosphate-treated surfaces, water or saline-exposed metals
• Shelf Life: 24 months

Approvals & Specifications

• MIL-PRF-16173E CLASS II GRADE 3 (P-3 preservative)
• VOC compliant (9 g/l or 0.1 lbs/gal)

Typical Aircraft MRO / AOG Applications

• Protection of aircraft structural components during storage
• Temporary corrosion prevention on landing gear parts
• Safeguarding hydraulic and fuel system metal components in transit
• Use on critical bare steel or phosphate-treated surfaces in aviation manufacturing

Compatibility & Safety Notes

• Compatible with bare steel and phosphate-treated metals
• Use proper PPE: gloves, eye protection, and adequate ventilation
• Do not apply near open flames; PL-3 is non-flammable but caution advised
• Remove with Esgard Thinner 102, mineral spirits, or naphtha
• Clean up personal contact with soap and water

Packaging & Procurement

• Available in ready-to-use gallon containers
• Maintain storage temperature above 60 F (15 C) to prevent viscosity increase
• Easy application via spray, brush, roller, dip, or fill-and-drain methods

Why ESGARD PL-3 is Chosen for AOG / MRO

• Fast, single-coat application for immediate protection
• Reliable corrosion inhibition in demanding environments
• Versatile use across multiple substrates and application methods
• Portable and easy-to-handle containers for quick deployment

Practical Suggestions for Your Team (AOG Mindset)

• Stock PL-3 for high-turnover parts in MRO operations
• Ensure staff are trained on uniform 1 mil (25 micron) wet film application
• Use appropriate storage and barrier materials for extended protection
• Regularly monitor shelf-life and replace older stock to maintain performance

Manufacture / Aviation Spec Codes

• Manufacturer: Esgard, Inc.
• Product ID: PL-3
• MIL Specification: MIL-PRF-16173E CLASS II GRADE 3

Alternative Names & Descriptions

• PL-3 Rust Preventive Coating
• P-3 Preservative Film
• Esgard Water-Displacing Thin Film
• Amber Corrosion Inhibitor Oil
• VOC-Compliant Metal Protective Film