Henkel - Bonderite BONDERITE-L-GP-D148A (1-Kg-Ctnr) - USA ONLY

Additional Product Information

Overview

BONDERITE L?GP D 148A ACHESON (also known as ENDU PTFE D 148A) is a PTFE dispersion in solvent that develops into a dry, lubricating film after curing. It is used as a dry film lubricant in industrial and aerospace applications where low friction and clean dry lubrication are required. BONDERITE L?GP D 148A ACHESON is a two?component material that must be mixed with a compatible hardener (BONDERITE S?OT DURCISSEUR / BONDERITE S?OT AH 1 ACHESON) prior to use.

Key Technical Specs

• Technology: Lubricant
• Product Type: PTFE dispersion in solvent
• Application: Dry film lubricant
• Aspect (wet product): Viscous green liquid
• Solids Content: 51 53?%
• Viscosity (Brookfield 20? C, 20?rpm): 100 200?mPa s
• Flash Point: ?4? C
• Density: 1,280?kg/m
• Mixing Ratio: 100?g resin to 17?g BONDERITE S?OT AH 1 ACHESON
• Pot Life: 20?hours at 20? C

Approvals & Specifications

• Henkel ACHESON product designed for industrial dry film lubrication applications
• Recommended for use in combination with BONDERITE S?OT AH 1 ACHESON hardener

Typical Applications

• Dry film lubrication for bearings, slides, and moving components
• Low?friction surface coatings in industrial assemblies
• Lubrication where clean, dry films are preferable to greases or oils
• Maintenance and assembly tasks requiring long?lasting surface lubrication

Compatibility & Safety Notes

• Pretreat surfaces: clean, degrease, and optionally sand?blast for improved adhesion
• Refer to Material Safety Data Sheet for safety, handling, and hazard information
• Observe local safety procedures and use recommended personal protective equipment

Application & Curing

• Preparation: Homogenize BONDERITE L?GP D 148A ACHESON before use
• Mixing: Add BONDERITE S?OT AH 1 ACHESON while stirring to full homogeneity
• Application: Adjust viscosity with suitable thinner (ethyl acetate, MEK, MIBK) for spray application; do not use alcohol thinners
• Curing: Approx. 24?hours at room temperature
• Heat Cure (Optional):
• After 1?hour air dry, cure 2?hours @ 60? C
• Cure 1?hour @ 150? C
• Cure 30?minutes @ 180? C

Storage & Shelf Life

• Recommended Storage Temperature: 5? C to 40? C
• Shelf Life: 12?months in unopened original packaging

Why BONDERITE L?GP D 148A ACHESON is Chosen for AOG / MRO

• Forms a durable dry lubricant film that can reduce friction and wear on moving surfaces
• Suitable for applications where grease or oil residues are undesirable
• Long pot life allows for flexibility in application scheduling

Practical Suggestions for Your Team (AOG Mindset)

• Ensure thorough surface cleaning and degreasing before application
• Mix resin and hardener thoroughly and use within specified pot life
• Follow recommended curing procedure to achieve optimal film performance
• Store material within temperature range to maintain product integrity

Manufacturer / Aviation Spec Codes

• Product Name: BONDERITE L?GP D 148A ACHESON (ENDU PTFE D 148A)
• Henkel ACHESON Industrial Lubricant Product
• Requires BONDERITE S?OT AH 1 ACHESON hardener for use
• Manufactured by Henkel AG & Co. KGaA

Alternative Names & Descriptions

• ENDU PTFE D 148A
• BONDERITE L?GP D 148A PTFE Dry Film Lubricant
• Henkel PTFE Dry Lubricant Coating